I wish I could remember the very first email message I ever sent. Unfortunately, the truth is that I've come to take email for granted; for instance, I easily send more email messages than I make phone calls. Because the novelty has long since worn off, the memory of that first email is as lost to me as my first phone call; but I doubt my sense of wonder was any less complete at the time. To someone who has never seen email in action before, that first message can be magical.
In this article, I'll try to recapture some of that magic for those of you who have never created a Web site that sends email messages. We'll see how the PHP server-side scripting language may be set up to send email, and explore how to send complex message types such as HTML email or emails with file attachments.
Note: This article was written back when things like HTML email and file attachments were a lot more difficult to do in PHP than they are today. Before you dive into the from-scratch solutions presented in this article, you might consider investigating PHPMailer, a free library for PHP that provides all of these features with minimal hair-pulling and gnashing of teeth.
PHP Email Setup
Before we can send email with PHP, we need to set it up to do so, just as you need to set up your email program before it can send messages. Configuration for sending email in PHP is done with the
php.ini file, so open up your Web server's php.ini in whichever editor you normally use.If you don't run your own server, but instead have a PHP-equipped Web host, you can safely assume that everything in this section has been done for you, and skip ahead.
In the section entitled
[mail function] in the php.ini file, you'll find three settings: SMTP, sendmail_from, and sendmail_path. If your server runs on a Windows machine, you'll want to set the SMTP option to point to your SMTP server (or your ISP's SMTP server, if you're setting up PHP on your home machine). If instead you're setting up PHP on a Linux (or other Unix-based OS) server, you'll want to set the sendmail_path option to point to the sendmail-t option. You can use the SMTP option in Linux instead if you don't have sendmail set up. program on your server, passing it the In either case, you'll want to set the
sendmail_from option to your email address, or whichever address you'd like to appear as the default 'from' address for emails sent from PHP scripts.Here's how the section might look on a typical Windows server, or on a Linux server without sendmail:
[mail function]
; Setup for Windows systems
SMTP = smtp.my.isp.net
sendmail_from = me@myserver.comAnd here's how it might look on a Linux server with sendmail:
[mail function]
; Setup for Linux systems
sendmail_path = /usr/sbin/sendmail -t
sendmail_from = me@myserver.comWith those settings in place, restart your Web server and you're ready to go!
Sending Plain Email
It doesn't come much easier than the procedure to send plain text email in PHP. In fact, you can do it in just one line in a PHP script:
mail('recipient@some.net', 'Subject', 'Your message here.');
?>The above line would send an email message to
recipient@some.net with 'Subject' as the subject line and 'Your message here.' as the message body. As you can see, PHP's mail function makes sending email exceedingly simple, but there are a few advanced tricks we can use to get more out of this simple function.First of all, if the mail system you configured in your
php.ini file rejects a message you try to send (for example, if the 'to' address is not a valid email address), this function will display an error message in the user's browser. Like most PHP functions, however, error messages may be suppressed by preceding the function name with an @ symbol. Combine this with the fact that the mail function returns either true or false depending on whether the email was accepted by the mail sending system, and you have a formula to send email with appropriate error checking: if (@mail($to, $subject, $message)) {
echo('Mail sent successfully.');
} else {
echo('Mail could not be sent.
');
}
?>
Note that just because an email message could be sent doesn't guarantee it will arrive at its destination. An email address can be valid (i.e. correctly formed) but not actually exist. For instance, you can successfully send a message to
nonexistant.user@hotmail.com -- that is, the mail function will return true -- but the message will bounce because no such user exists. PHP provides no built-in means of detecting when this happens.When you want to send a message to multiple recipients, you can just list their email addresses one after another, separated by commas, in the first parameter. For example:
mail('recipient1@some.net, recipient2@some.net',
'An email to two people', 'Message goes here.');
?>That about covers the basics of the
mail function; now let's really get fancy and explore mail headers and what we can do with them!HTML Email and Other Headers
So now you can send email from your PHP scripts. How exciting! Although I'm sure you're already drunk with power, would you like to know how to send HTML email too? Of course you would!
To understand HTML email, first you need to understand mail headers. Any given email message is made up of two parts: the headers and the message body. Here's how a simple message looks when your email program fetches it from your ISP:
Return-Path:
Delivered-To: you@some.net
Received: ...several lines like this...
From: Sender
To: You
Subject: A Simple Message
Date: Mon, 11 Feb 2002 16:08:19 -0500
Organization: Sender's Company
X-Mailer: Microsoft Outlook, Build 10.0.2616
Hi there! Is this thing on? Everything up to the blank line makes up the headers for this message. In actual fact, most email messages will have many more header lines than this; however, to keep our focus I trimmed this example down to the bare essentials.
As you can see, every line of the headers begins with the name of the header (
From:, To:, Subject:, Date:, etc.), followed by some value. Most headers are standardized, and have a specific meaning, either to your mail program or to the mail servers that were responsible for getting the message to you. Non-standard headers exist as well, and they all begin with X- (e.g. X-Mailer:, a non-standard header, often appears to indicate the program that was used to send the message).NOTE: If a header's value needs more than one line, additional lines should begin with a space. We'll see an example of this in the next section.
As soon as your mail program gets to a blank line, it knows the headers are over and the rest of the email is the message body, which it should display. In this case, the message body is the last line above.
PHP's
mail function lets you specify your own headers, which it adds to those it generates automatically to get your message where it needs to go. For example, the following call to the mail function will add an X-Mailer: header to the outgoing message, identifying PHP 4.x as the sending program: mail('recipient@some.net', 'Subject', 'Your message here.',
'X-Mailer: PHP 4.x');
?>This optional fourth parameter is most often used to specify a 'from' address other than the default specified in
php.ini. Let's add a From: header to do just that: mail('recipient@some.net', 'Subject', 'Your message here.',
"From: sender@some.net\nX-Mailer: PHP 4.x");
?>Note that since headers each appear on a single line, we must separate our two headers with a new line character (
\n), which means I need to use double quotes around the header string (single quoted strings don't recognize special character codes like \n).Additional headers also let you assign names to email addresses by specifying them in the format
name . Here's our example again, but this time with names "The Sender" and "The Receiver" attached to the relevant addresses: mail('recipient@some.net', 'Subject', 'Your message here.',
"To: The Receiver \n" .
"From: The Sender \n" .
"X-Mailer: PHP 4.x");
?> Notice that to do this, we've had to specify the
To: header manually, since the first parameter of PHP's mail function doesn't support this more advanced address format. We must still list all the recipients of the message as bare email addresses in the first parameter, however.The
cc: and Bcc: headers provide the ability to send carbon copies and blind carbon copies of a message as well: mail('recipient@some.net, someone@some.net, metoo@some.net',
'Subject', 'Your message here.',
"To: The Receiver \n" .
"From: The Sender \n" .
"cc: Interested \n" .
"Bcc: Me Too \n" .
"X-Mailer: PHP 4.x");
?> See how the email addresses of all recipients, be they actual addressees (To), carbon copies (Cc), or blind carbon copies (Bcc) are listed in the first parameter? This isn't documented anywhere, but in my testing I've found that it's absolutely vital if you want the message to get to everyone it's supposed to, especially on Windows servers where PHP's
mail function is especially sensitive.BUG ALERT: There are two apparent bugs in the PHPCc:header must be typed 'cc:' (as above) or 'CC:', that is, in either all-caps or low-caps. The mixed case version (Cc:) should work, but it doesn't. Secondly, on Windows servers, theBcc:header does not work as it should.Bcc:recipients do get a copy of the message, but theBcc:headers are not stripped out of the message during sending, so recipients can see theBcc:receivers by looking at those lines in the headers.
What does all this have to do with HTML email, you ask? Well, a few special headers will cause the message body to be interpreted as HTML by email clients that support it:
mail('recipient@some.net', 'Subject',
'Your message here.',
"To: The Receiver
"From: The Sender
"MIME-Version: 1.0\n" .
"Content-type: text/html; charset=iso-8859-1");
?>
Note both the message in HTML format as well as the two new headers:
Mime-Version: and Content-type:.The
MIME-Version: header indicates that the standard extended mail format will be used (MIME stands for Multipurpose Internet Mail Extensions), which allows for messages to be sent content types other than plain text. The Content-type: header then specifies that the message with contain HTML (and sets the character set to the standard for that format).Mixed Messages
In life, it's rarely good to send mixed messages. At least, that's what my last girlfriend told me! When it comes to email, however, mixed messages offer a whole lot of power. A single email message can contain both text and HTML versions of your message. That makes it viewable in most any email program, and you don't sacrifice the power of HTML formatting for readers that are appropriately equipped.
Be aware that mixed messages have their weaknesses. First of all, since you're sending two versions of your message, the message will typically be a lot larger than it would be if you sent just one format or the other. Also note that old email programs that don't recognize the mixed message format may display both versions of the message as file attachments (one text, the other HTML).
Let's look at a simple example of a mixed email message, and then look at the PHP code to send it:
Date: Mon, 11 Feb 2002 16:08:19 -0500
To: The Receiver
From: The Sender
Subject: A simple mixed message
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="==Multipart_Boundary_xc75j85x"
This is a multi-part message in MIME format.
--==Multipart_Boundary_xc75j85x
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
This is the text portion of the mixed message.
--==Multipart_Boundary_xc75j85x
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
This is the HTML portion of the mixed message.--==Multipart_Boundary_xc75j85x--
After the initial, standard headers at the top of the message, we have the
MIME-Version: 1.0 header that enables the advanced email features we need. The Content-Type: header is where things start to get funky:Content-Type: multipart/alternative;
boundary="==Multipart_Boundary_xxc75885"We specify a content type of
multipart/alternative, which is the special type that allows us to send a message with two or more alternative versions of the message (from which the recipient's email program will pick the most suitable for display). In addition, we use the Content-Type header to set a boundary string.To keep the header lines short, this part of the header appears on a second line (as mentioned in a note above, the second line must begin with one or more spaces to indicate that it's a continuation of the previous line).
In this case, I chose "
==Multipart_Boundary_xc75j85x" as the boundary string. There is no special significance to this string, other than it is unlikely to appear as part of the message itself. I used characters like equals signs and underscores, and semi-random strings of letters and numbers to help ensure this. We then use this string to divide up our message into parts.The text "
This is a multi-part message in MIME format." is included for the benefit of older mail programs, so that the user has some idea of why the email may not appear quite as expected. With that disclaimer out of the way, we use our boundary to mark the start of the first part of our message:--==Multipart_Boundary_xc75j85x
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
This is the text portion of the mixed message.Notice that we add two dashes (
--) to the beginning of the boundary string when we actually use it.After the first boundary, we begin the text version of the message. Each part of the message begins with a couple of headers to indicate its content type and encoding. In the case of the text part, the content type is
text/plain (with the standard character set, iso-8859-1), and the encoding is 7bit (plain ASCII text). A blank line marks the end of the headers, which are followed by the message body.The HTML version then follows:
--==Multipart_Boundary_xc75j85x
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
This is the HTML portion of the mixed message.The headers are almost identical to the text part, but this time we specify
text/html as the content type. After the body of the HTML document, all that remains is the closing boundary, to which we add an extra two dashes on the end to mark the end of the message:--==Multipart_Boundary_xc75j85x--As you can see, mixed messages may look complicated, but they're actually pretty simple when you take a closer look. The only tricky part from the standpoint of a PHP developer who wants to send a message like this is the task of generating a boundary string.
Here's how I like to do it:
$semi_rand = md5(time());
$mime_boundary = "==Multipart_Boundary_x{$semi_rand}x";
?>We take the current Unix timestamp (the number of seconds since January 1, 1970), as given by
time(), and use the MD5 algorithm to convert it to a semi-random string. This string is then used to make up part of the boundary string. Feel free to use whatever method you like to generate your boundary strings.With all this in mind, you should be well-equipped to generate mixed messages in PHP. Since mixed messages are relatively uncommon, I'll leave the actual code for you to write as an exercise. This business of splitting up messages into parts with a boundary string is important, however, when it comes to file attachments -- the subject of our final section.
File Attachments
File attachments work just like mixed email, except that a different content type is used for the message as a whole (
multipart/mixed instead of multipart/alternative), and there's a new Content-Disposition header that tells the email client how to handle each part of the message.Let's write a PHP script that processes a form submission that contains an email message to be sent, possibly with a file attachment, and sends it out. I'll talk you through it line by line so that by the end you'll not only have a useful snippet of PHP code, but also an understanding of how file attachments work. You can download the script (and the form for it) if you want to try it out for yourself.
First, we grab the submitted values and place them in PHP variables. Most people have their servers set up to create global variables for submitted values automatically, but as of PHP 4.1 this is no longer the default, so we do it by hand just in case. Since we want to accept file attachments, it's safe to assume that the form will be submitted with a POST request:
// Read POST request params into global vars
$to = $_POST['to'];
$from = $_POST['from'];
$subject = $_POST['subject'];
$message = $_POST['message'];File uploads in PHP 4.1 are placed in a special
$_FILES array, so we fetch the values we need out of it:// Obtain file upload vars
$fileatt = $_FILES['fileatt']['tmp_name'];
$fileatt_type = $_FILES['fileatt']['type'];
$fileatt_name = $_FILES['fileatt']['name'];For the sake of brevity, we'll assume that the required parameters (
$to and $from) now have valid values (email addresses) in them. Normally we would check their format with regular expressions.Next, we use the
$from value to begin building the extra headers for the email:$headers = "From: $from";Next we check the
$fileatt variable, which may or may not contain the path and filename to an uploaded file attachment. We use PHP's is_uploaded_file function to find out:if (is_uploaded_file($fileatt)) {
// Read the file to be attached ('rb' = read binary)
$file = fopen($fileatt,'rb');
$data = fread($file,filesize($fileatt));
fclose($file);Having read in the data for the file attachment, we need to set up the message headers to send a
multipart/mixed message: // Generate a boundary string
$semi_rand = md5(time());
$mime_boundary = "==Multipart_Boundary_x{$semi_rand}x";
// Add the headers for a file attachment
$headers .= "\nMIME-Version: 1.0\n" .
"Content-Type: multipart/mixed;\n" .
" boundary=\"{$mime_boundary}\"";Now for the message body itself. This works just as we saw for the text part of a mixed message in the previous section:
// Add a multipart boundary above the plain message
$message = "This is a multi-part message in MIME format.\n\n" .
"--{$mime_boundary}\n" .
"Content-Type: text/plain; charset=\"iso-8859-1\"\n" .
"Content-Transfer-Encoding: 7bit\n\n" .
$message . "\n\n";Now, to allow for binary file types, we need to use Base64 encoding to convert the (possibly binary) file attachment data to a text-only format suitable for sending by email. All email programs in popular use support Base64 encoding of file attachments, so this is the best way to go. Fortunately, PHP provides a function for Base64 encoding:
// Base64 encode the file data
$data = chunk_split(base64_encode($data));We now have everything we need to write the portion of the message that contains the file attachment. Here's the code:
// Add file attachment to the message
$message .= "--{$mime_boundary}\n" .
"Content-Type: {$fileatt_type};\n" .
" name=\"{$fileatt_name}\"\n" .
"Content-Disposition: attachment;\n" .
" filename=\"{$fileatt_name}\"\n" .
"Content-Transfer-Encoding: base64\n\n" .
$data . "\n\n" .
"--{$mime_boundary}--\n";
}That completes the modifications necessary to accommodate a file attachment. We can now send the message with a quick call to
mail:// Send the message
$ok = @mail($to, $subject, $message, $headers);
if ($ok) {
echo "Mail sent! Yay PHP!";
} else {
echo "Mail could not be sent. Sorry!
";
}
?>
And that's how we send emails with file attachments in PHP!
Summary
In this article, you probably learned a lot more about email than you ever wanted to know. That intimate knowledge about what makes email tick allowed us to do some pretty special things with PHP's deceptively simple
mail function.- we learned how to manipulate email headers to play with the recipients of an email
- we saw the headers that permit you to send HTML email
- we combined the HTML and text versions of an email into a single, mixed message
and finally...
- we brought it all together with a couple of new tricks to send email messages with file attachments.
If you're in the mood for a challenge, try expanding the file attachment script in this article to allow for multiple file attachments, or to allow for an HTML message. If you're an object oriented PHP type, try developing a class that encapsulates the functionality we explored in this article (there are a number of such scripts available on the Internet if you're after something ready-made).
If you're really interested, check out the RFC for MIME extensions (RFC 2045) to discover everything that email is capable of, then go wild!
(OR)
Use ini_set() :
ini_set('SMTP', 'smtp.abc.net'); // SMTP of your provider (same as in Outlook)
ini_set('sendmail_from', 'ht@abc.net'); // Your emailaddress
ini_set('sendmail_from', 'ht@abc.net'); // Your emailaddress
Very nice article
ReplyDelete